+ View the NASA Portal
+ Center for Near-Earth Object Studies
HORIZONS Web-Interface
This tool provides a web-based
limited
interface to
JPL's HORIZONS system
which can be used to generate ephemerides for solar-system bodies. Full access to
HORIZONS
features is available via the primary
telnet interface
.
HORIZONS system news
shows recent changes and improvements. A
web-interface tutorial
is available to assist new users.
Current Settings
Ephemeris Type [
change
] :
OBSERVER
Target Body [
change
] :
Mars
[499]
Observer Location [
change
] :
Geocentric
[500]
Time Span [
change
] :
Start=
2020-09-19
, Stop=
2020-10-19
, Step=
1
d
Table Settings [
change
] :
defaults
Display/Output [
change
] :
default
(formatted HTML)
ERROR:
sorry, session ID '4d130f348c06676738a791ca27fdc341' has expired
a
new ID
has been issued, 1b5f233ee2c593110be67866e13e6e72
if you got here from a bookmark, please update your bookmark using
this link
enabling "cookies" on your browser may help in the future
please check your input and try again
Table Settings
Select observer quantities from table below:
[
switch to manual-entry list-of-numbers form
]
Optionally preset observer quantities selection using one of the following:
1.
Astrometric RA & DEC
17.
North Pole position angle & distance
33.
Galactic longitude & latitude
* 2.
Apparent RA & DEC
18.
Heliocentric ecliptic lon. & lat.
34.
Local apparent SOLAR time
3.
Rates; RA & DEC
19.
Heliocentric range & range-rate
35.
Earth->obs. site light-time
* 4.
Apparent AZ & EL
20.
Observer range & range-rate
> 36.
RA & DEC uncertainty
5.
Rates; AZ & EL
21.
One-way (down-leg) light-time
> 37.
Plane-of-sky error ellipse
6.
Satellite X & Y, pos. angle
22.
Speed wrt Sun & observer
> 38.
POS uncertainty (RSS)
7.
Local apparent sidereal time
23.
Sun-Observer-Target ELONG angle
> 39.
Range & range-rate 3-sigmas
8.
Airmass & extinction
24.
Sun-Target-Observer ~PHASE angle
> 40.
Doppler & delay 3-sigmas
9.
Visual mag. & Surface Brght
25.
Target-Observer-Moon angle/ Illum%
41.
True anomaly angle
10.
Illuminated fraction
26.
Observer-Primary-Target angle
42.
Local apparent hour angle
11.
Defect of illumination
27.
Sun-Target radial & -vel pos. angle
43.
PHASE angle & bisector
12.
Satellite angular separ/vis.
28.
Orbit plane angle
44.
Apparent longitude Sun (L_s)
13.
Target angular diameter
29.
Constellation ID
* 45.
Inertial apparent RA & DEC
14.
Observer sub-lon & sub-lat
30.
Delta-T (TDB - UT)
46.
Rate: Inertial RA & DEC
15.
Sun sub-longitude & sub-latitude
* 31.
Observer ecliptic lon. & lat.
16.
Sub-Sun position angle & distance
32.
North pole RA & DEC
Notes:
*
affected by optional atmospheric refraction setting (below)
>
statistical value that uses orbit covariance if available
Observer quantities are described in the
HORIZONS documentation
.
Optional observer-table settings:
date/time format :
calendar date/time
Julian Day Number
both
-- display date/time in year-month-day and/or Julian-day format
time digits :
minutes (HH:MM)
seconds (HH:MM:SS)
fractional seconds (HH:MM:SS.SSS)
-- controls output precision of time
angle format :
hours/degrees minutes seconds
decimal degrees
-- select RA/Dec output format
output units :
km & km/s
km & km/d
AU & AU/d
-- units for most output quantities
range units :
astronomical units
kilometers
-- units for range-type quantities
refraction model :
airless model (no refraction)
standard atmosphere refraction model
-- select atmospheric refraction model
airmass cut-off :
-- suppress output when airmass is greater than limit [1 to 38]
elevation cutoff :
(deg) -- suppress output when object elevation is less than limit [-90 to 90]
solar elong. cut-off :
-
(deg) -- suppress output when solar elongation is outside (min,max) range [0 to 180, min to 180]
hour angle cutoff :
(h) -- suppress output when the local hour angle (LHA) exceeds value [0 to 12]
angular rate cutoff :
(arcsec/h) -- suppress output when the RA/Dec angular rate exceeds this value [0 to 100000]
suppress range-rate :
-- suppress range-rate for range/range-rate output
skip daylight :
-- suppress output during daylight
extra precision :
-- output additional digits for RA/Dec quantities
RTS flag :
disable
true visual horizon
geometric horizon
radar horizon
-- output data only at target rise/transit/set (RTS)
reference system :
ICRF/J2000.0
FK4/B1950.0
-- reference frame for geometric and astrometric quantities
CSV format :
-- output data in Comma-Separated-Values (CSV) format
object page :
-- include object information/data page on output
2020-Sep-19 00:27 UT
(server date/time)
Site Manager:
Ryan S. Park
Webmaster
:
Alan B. Chamberlin
